HP ENVY 17-3277nr HP ENVY 17 - Maintenance and Service Guide - Page 86
straight up, and remove it., Lift the processor
View all HP ENVY 17-3277nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
d. System board (see System board on page 70) e. Fan/heat sink assembly (see Fan/heat sink assembly on page 74) Remove the processor: 1. Turn the processor locking screw (1) one-half turn counterclockwise, until you hear a click. 2. Lift the processor (2) straight up, and remove it. NOTE: The gold triangle (3) on the processor must be aligned with the triangle icon (4) embossed on the processor socket when you install the processor. Reverse this procedure to install the processor. 78 Chapter 4 Removal and replacement procedures ENWW
d.
System board (see
System board
on page
70
)
e.
Fan/heat sink assembly (see
Fan/heat sink assembly
on page
74
)
Remove the processor:
1.
Turn the processor locking screw
(1)
one-half turn counterclockwise, until you hear a click.
2.
Lift the processor
(2)
straight up, and remove it.
NOTE:
The gold triangle
(3)
on the processor must be aligned with the triangle icon
(4)
embossed on the processor socket when you install the processor.
Reverse this procedure to install the processor.
78
Chapter 4
Removal and replacement procedures
ENWW