HP ENVY 17-j050us HP ENVY 17 Notebook PC HP ENVY TouchSmart m7 Notebook PC HP - Page 99
Heat sink
View all HP ENVY 17-j050us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
3. Lift the system board (1) , and then remove the system board (2) by sliding it up and to the right at an angle. Reverse this procedure to install the system board. Heat sink Description For use only on computer models equipped with the Intel HM87 Express Chipset and an Nvidia N14P-GT (GeForce 750M) graphics subsystem For use only on computer models equipped with the Intel HM87 Express Chipset and an Nvidia N14P-GV2 (GeForce 740M) graphics subsystem For use only on computer models equipped with the Intel HM87 Express Chipset and a graphics subsystem with UMA memory For use only on computer models equipped with the Intel HM77 Express chipset and an Nvidia N14P-GV2 (GeForce 740M) graphics subsystem For use only on computer models equipped with the Intel HM77 Express chipset and a graphics subsystem with UMA memory Spare part number 720233-001 720232-001 720231-001 720234-001 722381-001 NOTE: To properly ventilate the computer, allow at least 7.6 cm (3 in) of clearance on the left side of the computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is designed to turn on automatically when high temperature conditions exist. These conditions are affected by high external temperatures, system power consumption, power management/battery conservation configurations, battery fast charging, and software requirements. Exhaust air is displaced through the ventilation grill located on the left side of the computer. Before removing the heat sink, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. Component replacement procedures 89