HP ENVY 17-j115cl HP ENVY 17 Notebook PC HP ENVY TouchSmart m7 Notebook PC HP - Page 70
Optical drive connector board, Remove the battery see
View all HP ENVY 17-j115cl manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Remove the front speakers: 1. Turn the computer, with the front edge toward you. 2. Remove 4 screws (1). 3. Disengage the cables, and then remove the front speakers (2). Reverse this procedure to install the speakers. Optical drive connector board NOTE: The optical drive connector board and cable are included in the optical drive spare part kit. See x for optical drive spare part kit information. Before removing the optical drive connector board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 39). 5. Remove the service cover (see Service cover on page 40). 6. Remove the hard drive (see Hard drive on page 41). 7. Remove the memory modules (see Memory modules on page 43). 8. Remove the WLAN module (see WLAN module on page 44). 60 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts