HP ENVY 17-s100 Maintenance and Service Guide - Page 57

Power connector cable, and routing channel built into the keyboard

Get HP ENVY 17-s100 PDF manuals and user guides View all HP ENVY 17-s100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

Power connector cable Description Power connector cable HP Confidential Spare part number 809295-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 24). 5. Remove the optical drive (see Optical drive on page 25). 6. Remove the bottom cover (see Bottom cover on page 28). 7. Remove the system board (see System board on page 40). Remove the power connector cable: 1. Disconnect the power connector cable (1) from the system board. 2. Release the power connector cable from the clips (2) and routing channel built into the keyboard/ top cover. 3. Release the power connector (3) from the molded slot built into the keyboard/top cover. 4. Remove the power connector cable. Reverse this procedure to install the power connector cable. Component replacement procedures 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
Power connector cable
Description
Spare part number
Power connector cable
809295-001
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
24
).
5.
Remove the optical drive (see
Optical drive
on page
25
).
6.
Remove the bottom cover (see
Bottom cover
on page
28
).
7.
Remove the system board (see
System board
on page
40
).
Remove the power connector cable:
1.
Disconnect the power connector cable
(1)
from the system board.
2.
Release the power connector cable from the clips
(2)
and routing channel built into the keyboard/
top cover.
3.
Release the power connector
(3)
from the molded slot built into the keyboard/top cover.
4.
Remove the power connector cable.
Reverse this procedure to install the power connector cable.
HP
Confidential
Component replacement procedures
49