HP ENVY 17t-3200 HP ENVY 17 - Maintenance and Service Guide - Page 71

board and system board., Disconnect the audio/USB board ZIF cable

Get HP ENVY 17t-3200 PDF manuals and user guides View all HP ENVY 17t-3200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 71 highlights

4. If it is necessary to replace the audio/USB board cable: a. Disconnect the audio/USB board cable (1) from the audio/USB board and system board. b. Release the audio/USB board cable through the opening (2) in the base enclosure. c. Remove the audio/USB board cable by lifting the cable through the opening (3) between the base enclosure and the system board. 5. If it is necessary to replace the audio/USB board ZIF cable: a. Disconnect the audio/USB board ZIF cable (1) from the ZIF connectors on the audio/USB board and system board. b. Release the audio/USB board ZIF cable through the openings (2) in the base enclosure. c. Remove the audio/USB board ZIF cable (3). Reverse this procedure to install the audio/USB board and cables. ENWW Component replacement procedures 63

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
4.
If it is necessary to replace the audio/USB board cable:
a.
Disconnect the audio/USB board cable
(1)
from the audio/USB board and system board.
b.
Release the audio/USB board cable through the opening
(2)
in the base enclosure.
c.
Remove the audio/USB board cable by lifting the cable through the opening
(3)
between the
base enclosure and the system board.
5.
If it is necessary to replace the audio/USB board ZIF cable:
a.
Disconnect the audio/USB board ZIF cable
(1)
from the ZIF connectors on the audio/USB
board and system board.
b.
Release the audio/USB board ZIF cable through the openings
(2)
in the base enclosure.
c.
Remove the audio/USB board ZIF cable
(3)
.
Reverse this procedure to install the audio/USB board and cables.
ENWW
Component replacement procedures
63