HP ENVY 27s 27-inch Display User Guide - Page 17
Attaching the VESA mounting bracket
View all HP ENVY 27s 27-inch Display manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Attaching the VESA mounting bracket A VESA mounting bracket is included with the monitor for use when attaching the monitor panel to a wall, swing arm, or other mounting fixture. NOTE: With the VESA bracket installed, the monitor can be viewed only in the Landscape mode. The Portrait mode is not supported. 1. Remove the monitor stand. Refer to Removing the monitor stand on page 10. 2. Remove and retain the screw from the center of the rear of the monitor panel. 3. Insert the tab of the VESA bracket into the slots on the back of the monitor panel until the bracket clicks into place (1), and then secure the top of the bracket with the screw that you removed in the second step (2). 4. To attach the monitor to a swing arm or other mounting device, insert four mounting screws through the holes on the mounting device and into the screw holes on the VESA bracket. Setting up the monitor 11