HP ENVY 4t-1200 HP ENVY 4 Sleekbook HP ENVY 4 Ultrabook HP ENVY 4 Ultrabook HP - Page 51
Battery, Remove the display panel see
View all HP ENVY 4t-1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
2. Remove the bottom enclosure. NOTE: To remove the bottom enclosure, use a thin, non-conductive tool such as the HP Tool Shroud separator, available on the HP website. Battery Description 4-cell, 52WHr 3.55AH Li-ion battery Spare part number 681949-001 Before removing the battery, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display panel on page 39). 5. Remove the base enclosure (see Base enclosure on page 42). Remove the battery: 1. Turn the computer right-side up, with the front toward you. Component replacement procedures 43