HP ENVY 750-400 Hard Drive Replacement Instructions - Page 1

Hard Drive Replacement Instructions 863072-001 Before you begin Observe the following requirements before removing and replacing the hard drive. WARNING: Never open the cover while the power cord is attached. You might damage your computer or be injured by the spinning fan blades. WARNING: Avoid touching sharp edges inside the computer. CAUTION: A hard drive is extremely sensitive to shock and impact. Do not bang or drop it. Do not touch the circuit board. Static electricity can damage the drive. CAUTION: Static electricity can damage the electronic components inside the computer. Discharge static electricity by touching the metal cage of the computer before touching any internal parts or electronic components. Tools needed Phillips #2 screwdriver Small screws are easily lost. Remove screws over a surface that enables you to retrieve them if they fall. Removing the hard drive 1. Disconnect the power cord and all attached cables from the back of the computer. 2. To remove the access panel, loosen the captive Phillips screw (1), slide the access panel back, and then lift it off the computer (2). 863072-001 1