HP ENVY Sleekbook CTO 6z-1000 HP Envy 6 Maintenance and Service Guide - Page 46
Hard drive, Disconnect the battery cable see
View all HP ENVY Sleekbook CTO 6z-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Hard drive Description 320-GB 7200RPM SATA 7mm 320-GB 5400RPM SATA 7mm 500-GB 5400RPM SATA 7mm 32-GB mSATA solid-state drive (SSD) 128-GB mSATA solid-state drive (SSD) Spare part number 634862-005 645193-005 683802-005 687100-001 687101-001 Before removing the hard drive or SSD, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the display panel (see Display panel on page 32). 5. Remove the base enclosure (see Base enclosure on page 34). 6. Disconnect the battery cable (see Battery on page 36). Remove the hard drive: 1. Disconnect the hard drive cable from the system board (1), and then remove the 4 screws (2) securing the hard drive to the top cover. 38 Chapter 4 Removal and replacement procedures