HP ENVY TouchSmart 14t-k100 HP Envy 14 Sleekbook - Maintenance and Service Gui - Page 57
RJ-45 module cover
View all HP ENVY TouchSmart 14t-k100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
RJ-45 module cover Description RJ-45 module cover (black) RJ-45 module cover (red) Spare part number 729606-001 733475-001 Before removing the RJ-45 module cover: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the service cover (see Service cover on page 37). 5. Remove the battery (see Battery on page 39). Remove the RJ-45 module cover: 1. Remove the power connector cable and the antenna cables from the clip built into the side of the RJ-45 module cover. 2. Remove the 2 Phillips PM2.5×5.5 screws that secure the RJ-45 module cover (1) to the computer. 3. Remove the cover (2) from the computer. Reverse this procedure to install the RJ-45 module cover. Component replacement procedures 49