HP ENVY TouchSmart 15-j173ca HP ENVY 15 Notebook PC and HP ENVY TouchSmart 15 - Page 98
TouchPad assembly, Remove the TouchPad
View all HP ENVY TouchSmart 15-j173ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
TouchPad assembly Description TouchPad assembly (includes TouchPad bracket, TouchPad button board, TouchPad, and cables) Spare part number 722972-001 Before removing the TouchPad, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 41), and then remove the following components: a. Service door (see Service door on page 42) b. mSATA SSD (see mSATA SSD on page 43) c. Hard drive (see Hard drive on page 46) d. Base enclosure (see Base enclosure on page 53) e. System board (see System board on page 64) f. Front speakers (see Front speakers on page 86) Remove the TouchPad: 1. Remove the two Phillips PM2.0×2.9 screws (1) that secure the TouchPad bracket to the top cover. 88 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts