HP ENVY TouchSmart 15-j178ca HP ENVY 15 Notebook PC and HP ENVY TouchSmart 15 - Page 62
to remove the disc cell RTC battery, from the socket
View all HP ENVY TouchSmart 15-j178ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
2. Detach the RTC battery (2) from the base enclosure. (The RTC battery is attached to the base enclosure by double-sided tape.) 3. Remove the RTC battery. NOTE: Step 4 applies only to computer models equipped with an Intel processor. 4. Use a thin, non-conductive tool (1) to remove the disc cell RTC battery (2) from the socket on the system board. 52 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
2.
Detach the RTC battery
(2)
from the base enclosure. (The RTC battery is attached to the base
enclosure by double-sided tape.)
3.
Remove the RTC battery.
NOTE:
Step 4 applies only to computer models equipped with an Intel processor.
4.
Use a thin, non-conductive tool
(1)
to remove the disc cell RTC battery
(2)
from the socket on
the system board.
52
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts