HP ENVY TouchSmart 15-j178ca HP ENVY 15 Notebook PC and HP ENVY TouchSmart 15 - Page 102
Rear speaker see, Subwoofer see
View all HP ENVY TouchSmart 15-j178ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Before removing the keyboard, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 40), and then remove the following components: a. Service door (see Service door on page 41) b. mSATA SSD (see mSATA SSD on page 42) c. Hard drive (see Hard drive on page 45) d. Base enclosure (see Base enclosure on page 52) e. System board (see System board on page 63) f. Connector board (see Connector board on page 77) g. Subwoofer (see Subwoofer on page 80) h. Rear speaker (see Rear speakers on page 82) i. Power button board (see Power button board on page 90) Remove the keyboard: 1. Remove the seven Phillips PM2.0×2.9 screws (1) that secure the keyboard shield to the computer. 2. Release the ground loop tape (2). 92 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts