HP ENVY TouchSmart m6-k022dx HP ENVY m6 Sleekbook HP ENVY Touchsmart m6 SleekB - Page 60

Power button board, Remove the Phillips PM2.0×2.0 broadhead screw

Get HP ENVY TouchSmart m6-k022dx PDF manuals and user guides View all HP ENVY TouchSmart m6-k022dx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

Power button board Description Power button board Spare part number 725451-001 Before removing the power button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the service cover (see Service cover on page 30). 5. Remove the battery (see Battery on page 32). 6. Remove the fan (see Fan on page 45). 7. Remove the card reader board (see Card reader board on page 44). 8. Remove the system board (see System board on page 47). Remove the power button board and cable: 1. Remove the Phillips PM2.0×2.0 broadhead screw (1) and the Phillips PM2.5×3.5 screw (2) that secures the right hinge to the computer. 2. Remove the power button board (3) from the computer. NOTE: The power button board cable is soldered onto the board. 52 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
Power button board
Description
Spare part number
Power button board
725451-001
Before removing the power button board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the service cover (see
Service cover
on page
30
).
5.
Remove the battery (see
Battery
on page
32
).
6.
Remove the fan (see
Fan
on page
45
).
7.
Remove the card reader board (see
Card reader board
on page
44
).
8.
Remove the system board (see
System board
on page
47
).
Remove the power button board and cable:
1.
Remove the Phillips PM2.0×2.0 broadhead screw
(1)
and the Phillips PM2.5×3.5 screw
(2)
that
secures the right hinge to the computer.
2.
Remove the power button board
(3)
from the computer.
NOTE:
The power button board cable is soldered onto the board.
52
Chapter 4
Removal and replacement procedures