HP ENVY TouchSmart m6-k100 HP ENVY m6 Sleekbook HP ENVY Touchsmart m6 SleekBoo - Page 51
Power connector cable
View all HP ENVY TouchSmart m6-k100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Remove the USB/audio board: 1. Disconnect USB/audio connector cable (1) from the system board. 2. Remove the cable from the adhesive that secures it to the keyboard frame (2). 3. Disconnect the USB/audio cable (3). 4. Disconnect the subwoofer speaker cable (4). 5. Pull up on the USB/audio board (5), and pull it away from the computer side to remove it (6). Reverse this procedure to install the USB/audio board. Power connector cable Description Power connector cable (includes bracket) Spare part number 725444-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the service cover (see Service cover on page 30). 5. Disconnect the battery cable (see Battery on page 32). Component replacement procedures 43