HP ENVY dv6-7267cl HP ENVY dv6 Notebook PC Maintenance and Service Guide IMPOR - Page 72
connected, and then disconnect the cable, Release the ZIF connector
View all HP ENVY dv6-7267cl manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
6. Lift the rear edge of the keyboard (1), and then swing the keyboard (2) up and forward until it rests upside down on the palm rest. 7. Release the zero insertion force (ZIF) connector (1) to which the keyboard backlight cable is connected, and then disconnect the cable (2) from the system board. 8. Release the ZIF connector (3) to which the keyboard cable is connected, and then disconnect the cable (4) from the system board. 64 Chapter 4 Removal and replacement procedures
6.
Lift the rear edge of the keyboard
(1)
, and then swing the keyboard
(2)
up and forward until it
rests upside down on the palm rest.
7.
Release the zero insertion force (ZIF) connector
(1)
to which the keyboard backlight cable is
connected, and then disconnect the cable
(2)
from the system board.
8.
Release the ZIF connector
(3)
to which the keyboard cable is connected, and then disconnect
the cable
(4)
from the system board.
64
Chapter 4
Removal and replacement procedures