HP ENVY dv7-7212nr HP ENVY dv7 Notebook PC Maintenance and Service Guide IMPOR - Page 99
Remove the optical drive connector cable
View all HP ENVY dv7-7212nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Remove the optical drive connector cable: 1. Release the optical drive connector cable (1) from the clips and routing channel built into the base enclosure. 2. Remove the two Phillips PM2.0×4.0 screws (2) that secure the optical drive connector cable to the base enclosure. 3. Remove the optical drive connector (3). Reverse this procedure to install the optical drive connector cable. Component replacement procedures 91
Remove the optical drive connector cable:
1.
Release the optical drive connector cable
(1)
from the clips and routing channel built into
the base enclosure.
2.
Remove the two Phillips PM2.0×4.0 screws
(2)
that secure the optical drive connector cable to
the base enclosure.
3.
Remove the optical drive connector
(3)
.
Reverse this procedure to install the optical drive connector cable.
Component replacement procedures
91