HP ENVY dv7-7234nr HP ENVY dv7 Notebook PC Maintenance and Service Guide IMPOR - Page 83
Power connector cable, Disconnect the power connector cable
View all HP ENVY dv7-7234nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Power connector cable Description For use only on computer models equipped with an AMD processor For use only on computer models equipped with an Intel processor Spare part number 681973-001 681974-001 Before removing the power connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 47), and then remove the following components: a. Hard drive (see Hard drive on page 48) b. Optical drive (see Optical drive on page 53) c. Keyboard (see Keyboard on page 59) d. Top cover (see Top cover on page 63) Remove the power connector cable: 1. Disconnect the power connector cable (1) from the system board. 2. Release the power connector cable from the clips (2) and routing channel built into the base enclosure. 3. Release the tape that secures the power connector (3) to the base enclosure. Component replacement procedures 75