HP ENVY dv7-7243cl HP ENVY dv7 Notebook PC Maintenance and Service Guide IMPOR - Page 78
TouchPad button board, Remove the Phillips PM2.5×3.0 screw
View all HP ENVY dv7-7243cl manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Remove the fingerprint reader board: 1. Turn the top cover upside down, with the front toward you. 2. Detach the fingerprint reader board cable from the top cover. (The fingerprint reader board cable is attached to the top cover with double-sided tape.) 3. Remove the Phillips PM2.5×3.0 screw (2) that secures the fingerprint reader board bracket to the top cover. 4. Slide the fingerprint reader board bracket (3) up and away from the top cover. 5. Remove the fingerprint reader board (4) and cable. Reverse this procedure to install the fingerprint reader board. TouchPad button board Description TouchPad button board (includes cable and bracket) Spare part number 681987-001 Before removing the TouchPad button board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 47), and then remove the following components: a. Hard drive (see Hard drive on page 48) b. Optical drive (see Optical drive on page 53) 70 Chapter 4 Removal and replacement procedures