HP ENVY m6-1225dx HP ENVY m6 Notebook PC Maintenance and Service Guide - Page 56
Hard drive, Loosen the captive screw
View all HP ENVY m6-1225dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
To insert the battery: 1. Align the tabs on the rear edge of the battery with the notches on the rear edge of the battery bay. 2. Pivot the front edge of the battery down into the battery bay until it is seated. (The battery release latch will automatically lock into place.) Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket, hard drive connector cable, or screws. Description 1-TB, 5400-rpm, 9.5-mm 750-GB, 7200-rpm, 9.5-mm 750-GB, 5400-rpm, 9.5-mm 640-GB, 5400-rpm, 9.5-mm 500-GB, 7200-rpm, 9.5-mm 500-GB, 5400-rpm, 9.5-mm 320-GB, 7200-rpm, 9.5-mm 320-GB, 5400-rpm, 9.5-mm Hard Drive Hardware Kit (includes hard drive bracket, hard drive connector cable, and screws) Spare part number 676521-001 633252-001 634250-001 669300-001 634925-001 669299-001 641672-001 622643-001 686907-001 Before removing the hard drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 47). Remove the hard drive: 1. Loosen the captive screw (1) that secures the service cover to the computer. 2. Slide the battery release latch (2) to release the service cover. (The service cover releases (3) forward.) 48 Chapter 4 Removal and replacement procedures