HP ENVY m6-k000 HP ENVY Sleekbook and HP ENVY Touchsmart - Maintenance and Ser - Page 52
Speakers
View all HP ENVY m6-k000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
2. Remove the heat sink (2). Reverse this procedure to install the heat sink. CAUTION: These screws must be installed in the sequence that is marked on the heat sink so that the correct pressure is applied to the processor and other components. Speakers Description Speaker Kit Spare part number 725460-001 Before removing the right speaker, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure (see Base enclosure on page 27). 5. Disconnect the battery cable (see Battery on page 29). Remove the right speaker: 1. Turn the computer, with the front edge toward you. 2. Remove the Phillips PM 2.0x3.5 screw securing right speaker (1). 44 Chapter 4 Removal and replacement procedures