HP ENVY m6 Maintenance and Service Guide - Page 63
System board, defective system board and installed on the replacement system board
View all HP ENVY m6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
System board NOTE: The system board spare part kit includes replacement thermal material. All system boards use the following part numbers: xxxxxx-001: Non-Windows operating systems xxxxxx-601: Windows 8.1 or Windows 10 operating system Description Includes AMD FX-8800P processor for use in touch screen models Includes AMD FX-8800P processor for use in non-touch screen models Includes AMD A10-8700P processor for use in touch screen models Spare part number 813021-xxx 835049-xxx 824209-xxx Before removing the system board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Remove the battery (see Battery on page 44). 6. Remove the hard drive (see Hard drive on page 46). 7. Remove the front speakers (see Speakers (front) on page 48). 8. Remove the fan (see Fan on page 36). NOTE: When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board: ● Memory module (see Memory module on page 32) ● Heat sink (see Heat sink on page 42) ● Fan (see Fan on page 36) ● WLAN module (see WLAN module on page 30) Remove the system board: 1. Disconnect the following cables from the system board: (1) Display cable (2) Power connector cable (3) Subwoofer cable (4) Keyboard cable (5) LED board cable (6) Keyboard backlight cable Component replacement procedures 55