HP ENVY x2 11-g012nr HP Envy x2 Maintenance and Service Guide IMPORTANT! This - Page 57
Touch screen connector board, Display bezel
View all HP ENVY x2 11-g012nr manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Touch screen connector board Description Touch screen connector board Spare part number 702351-001 Before removing the touch screen connector board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the Touch screen: 1. Locate the Touch Screen connector board (1) on the system board, and then disconnect the touch screen connector board cable (2) from the system board. 2. Remove the screw securing the touch screen connector board (3), and then remove the touch screen connector board (4). Display bezel Description Display bezel (with antenna) Spare part number 702350-001 Component replacement procedures 49