HP EVA3000 HP StorageWorks 3000/5000 Enterprise Virtual Array updating product - Page 43
Table 10 VCS 4.100 System Software Upgrade Checklist
View all HP EVA3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Table 10 VCS 4.100 System Software Upgrade Checklist Step 1. Check storage system health Command View EVA indicates no hardware problems No hardware components in the Unmappable Hardware folder No critical events entered in the controller event log within the last 48 hours Storage system configuration is stable and no configuration changes have been made within the last 48 hours Step 2. Disable ISEE and SNMP Disable ISEE (if used) Disable SNMP Step 3. Clear storage system passwords (if used) Clear OCP password Disable password access in Command View EVA Step 4. Halt al host I/O (optional) Halt all I/O Step 5. Upgrade system software Upgrade VCS system software Step 6. Upgrade disk drive firmware Upgrade disk drive firmware Step 7. Enable storage system passwords (if used) Enter OCP password Enable password access in Command View EVA Step 8. Resume storage system operation Enable SNMP (if used) Enable ISEE (if used) HP StorageWorks 3000/5000 Enterprise Virtual Array updating product software guide (VCS 4.100) 43