HP EVA8400 HP StorageWorks Enterprise Virtual Array updating product software - Page 40
The Update Management Module Firmware window opens., Management module
View all HP EVA8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
1. Connect a server with a CD drive to the management module port (1, Figure 7) on the controller enclosure. Figure 7 Management module . 2. Insert the installation CD into the drive. 3. Open a browser and browse to the WOCP (Web-based Operator Control Panel): https://HP EVA storage system IP address:2373 NOTE: • If you are running a version of management module software earlier than 0001.1000 (which corresponds to XCS 09004000 or earlier), use port 2372. • If you have not previously set the IP address for the management module, the default is 192.168.0.1. • If you have not previously completed the initial setup for the management module, see "Connecting to the management module (initial setup)" in the Web-based operator panel user guide. The WOCP login window appears. 4. Log in as an HP EVA administrator (user name admin and the password). The WOCP GUI appears. 5. In the navigation pane, select Update management module firmware. The Update Management Module Firmware window opens. 6. Click Browse and browse to the installation CD. 7. Select the ABM.pkg file and then click Next step. 8. Follow the online instructions and then click Finish. A confirmation window opens. 40 Pre-upgrade tasks