HP EliteBook Folio 9480m Maintenance and Service Guide - Page 67

Touchpad, Remove the 2 Phillips PM2.0×3.0 screws

Get HP EliteBook Folio 9480m PDF manuals and user guides View all HP EliteBook Folio 9480m manuals
Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

5. Lift the base enclosure (1) off the computer while threading the antenna cables through the hole in the base enclosure (2). Reverse this procedure to install the base enclosure. Touchpad Before removing the touchpad, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 29), and then remove the following components: a. Hard drive cover (see Hard drive cover on page 32) b. Hard drive (see Hard drive/SSD drive on page 33) c. Service cover (see Service cover on page 38) d. Keyboard (see Keyboard on page 45) e. Base enclosure (see Base enclosure on page 53) Remove the touchpad: 1. Remove the 2 Phillips PM2.0×3.0 screws (1) that secure the touchpad to the computer. Component replacement procedures 55

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
5.
Lift the base enclosure
(1)
off
the computer while threading the antenna cables through the hole in the
base enclosure
(2)
.
Reverse this procedure to install the base enclosure.
Touchpad
Before removing the touchpad, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
29
), and then remove the following components:
a.
Hard drive cover (see
Hard drive cover
on page
32
)
b.
Hard drive (see
Hard drive/SSD drive
on page
33
)
c.
Service cover (see
Service cover
on page
38
)
d.
Keyboard (see
Keyboard
on page
45
)
e.
Base enclosure (see
Base enclosure
on page
53
)
Remove the touchpad:
1.
Remove the 2 Phillips PM2.0×3.0 screws
(1)
that secure the touchpad to the computer.
Component replacement procedures
55