HP EliteDesk 800 G5 PC Commercial BIOS UEFI Setup - Page 51
Options
View all HP EliteDesk 800 G5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
HP PC Commercial BIOS (UEFI) Setup July 2020 919946-004 Feature Host Based MAC Address MAC ADDRESS Reuse Embedded LAN Address Pre-boot HBMA Support Windows HBMA Support Single NIC Operation (Disable All Other NICs when HBMA is active on one NIC) HBMA Priority List Type Setting Setting Setting Setting Setting Setting Setting Description Can be set to Disabled, System, or Custom. Setting to System allows all HBMA settings to be modified except the custom MAC address. Setting to custom allows all settings including the custom MAC address to be modified. Configure a custom MAC address. Shows the current factory and system MAC addresses as well. When checked, enables the ability to reuse the embedded LAN address Set Host Based MAC Address (HBMA) support in the preboot environment such as PXE. Set host-based MAC address (HBMA) support in the Windows OS environment. When within Windows OS, only one NIC will operate using Host Based MAC Address (HBMA). This feature does not apply to PXE environments. Change the priority of USB and embedded Network Interface Cards (NICs) for the system. Default Disable Factory MAC Address Disable Checked but disabled until Host Based MAC Address is Enabled Checked but greyed out until Host Based MAC Address is Enabled Unchecked but greyed out until Host Based MAC Address is Enabled Notes Notebook Only (2016+) Notebook Only Notebook Only Notebook Only Notebook Only Notebook Only Notebook Only 5.12 Thunderbolt™ Options The following table describes various settings for configuring Thunderbolt™ ports, previously located in the Port Options menu. This menu organization is new in 2019 for platforms supporting Thunderbolt™ technology. There still remains a setting in Port Options to turn the Thunderbolt™ port on or off. Feature Thunderbolt™ Mode Require BIOS PW to change Thunderbolt™ Security Level Type Setting Setting Description When checked, enables Thunderbolt™ connections on the Type-C port. When checked, Thunderbolt™ Security Level cannot be changed unless a BIOS administrator password has been created. This setting cannot be disabled if DMA Protection (System Options) is enabled. Default Checked Checked Notes © Copyright 2016-2019 HP Development Company, L.P. 5 Advanced Menu 51