HP EliteOne 800 Hardware Reference Guide - Page 45
snaps into place.
View all HP EliteOne 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
3. Fasten an upper 2.5-inch hard disc drive securely in place with the four standard screws that shipped with the drive. 4. Position the 2.5-inch drive cage above its final site with the hard disc drive connectors facing toward the center of the chassis. If the drive cage contains a secondary (upper) drive, locate the power and data cables next to the drive cage and connect them to the secondary drive. 5. Place the 2.5-inch hard disc drive cage into the chassis and slide it toward the center until it snaps into place. Figure 2-38 Installing the 2.5-inch hard disc drive cage Replacing drives 39
3.
Fasten an upper 2.5-inch hard disc drive securely in place with the four standard screws that
shipped with the drive.
4.
Position the 2.5-inch drive cage above its final site with the hard disc drive connectors facing
toward the center of the chassis. If the drive cage contains a secondary (upper) drive, locate the
power and data cables next to the drive cage and connect them to the secondary drive.
5.
Place the 2.5-inch hard disc drive cage into the chassis and slide it toward the center until it
snaps into place.
Figure 2-38
Installing the 2.5-inch hard disc drive cage
Replacing drives
39