HP ElitePad Mobile POS G2 Maintenance and Service Guide - Page 50
Power button board
View all HP ElitePad Mobile POS G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Power button board Description Spare part number For use only on computer models equipped with the Windows 10 or Windows 8 Professional operating system 753976-601 For use only on computer models equipped with the Windows 10 or Windows 8 Standard operating system 753976-501 For use only on tablet models equipped with the Windows 10 or Windows Embedded Industry 8.1 64-bit 753976-401 Retail Solutions operating system For use only on computer models equipped with a non-Windows 10 or Windows 8 operating system 753976-001 Before removing the power button board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the display assembly (see Display assembly on page 28). 5. Remove the NFC antenna (see NFC antenna on page 35). 6. Disconnect the left microphone cable from the power button board (see Microphones on page 40). 7. Disconnect the rear-facing webcam cable from the power button board (see Rear-facing webcam on page 41). Remove the power button board: 1. Disconnect the volume button board cable (1) from the power button board. 2. Release the support strip (2) that secures the WWAN antenna transceiver to the battery. 3. Release the support strip (3) that secures the power button board cable to the system board. 4. Release the ZIF connector (4) to which the power button board cable is attached, and then disconnect the power button board cable from the system board. 42 Chapter 5 Removal and replacement procedures