HP Envy 15-1001xx HP ENVY 15 - Maintenance and Service Guide - Page 64
Power connector cable, Remove the two Phillips PM2.0×3.0 screws
View all HP Envy 15-1001xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Removal and replacement procedures Power connector cable Description Power connector cable (includes bracket) Spare part number 576846-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-7). 5. Remove the following components: a. Memory module compartment cover (see "Expansion memory module" on page 4-8) b. Top cover (see "Top cover" on page 4-10) c. Processor fan/heat sink assembly (see "Processor fan/heat sink assembly" on page 4-22) Remove the power connector cable: 1. Disconnect the power connector cable 1 from the system board. 2. Remove the two Phillips PM2.0×3.0 screws 2 that secure the power connector bracket and power connector to the base enclosure. 3. Remove the power connector bracket 3. 4. Remove the power connector cable 4 from the base enclosure. Reverse this procedure to install the power connector cable. 4-26 Maintenance and Service Guide