HP Evo D300v Compaq Evo D300v User`s Guide - Page 36
Setup Utility (Intel Celeron Models), Computer Setup Utilities (F10) - manual
View all HP Evo D300v manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
4 Setup Utility (Intel Celeron Models) Computer Setup Utilities (F10) Use Computer Setup to do the following: ■ Change factory default settings. ■ Set the system date and time. ■ Set, view, change, or verify the system configuration, including settings for processor, graphics, memory, audio, storage, communications, and input devices. ■ Modify the boot order of bootable devices such as hard drives, diskette drives, CD-ROM drives, DVD-ROM drives, or LS-120 drives. ■ Configure Quiet Drive options (for drives that support this feature). ■ Enable Quick Boot, which is faster than Full Boot but does not run all of the diagnostic tests run during a Full Boot. ■ Enable or disable Network Server Mode, which allows the computer to boot the operating system when the power-on password is enabled, with or without a keyboard or mouse attached. When attached to the system, the keyboard and mouse remain locked until the power-on password is entered. ■ Select Post Messages Enabled or Disabled to change the display status of Power-On Self-Test (POST) messages. Post Messages Disabled suppresses most POST messages, such as memory count, product name, and other non-error text messages. If a POST error occurs, the error is displayed regardless of the mode selected. To manually switch to Post Messages Enabled during POST, press any key (except F1 through F12). ■ Establish an Ownership Tag, the text of which is displayed each time the system is turned on or restarted. Compaq Evo D300v User's Guide 4-1