HP Evo n1020v Maintenance and Service Guide - Page 51
Table 2-3, Advanced Menu, Select, To Do This, Maintenance and Service Guide, Troubleshooting
View all HP Evo n1020v manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Troubleshooting Table 2-3 Advanced Menu (Continued) Select To Do This Device Options (continued) ■ Change the parallel port mode from Enhanced Parallel Port (EPP, the default setting) to standard, bidirectional, EPP or Enhanced Capabilities Port (ECP). ■ Set video-out mode to NTSC (default), PAL, NTSC-J, or PAL-M.* ■ Enable/disable all settings in the SpeedStep window. (When Disable is selected, the computer runs in Battery Optimized mode.) ■ Specify how the computer recognizes multiple identical docking bases that are identically equipped. (Select Disable to recognize the docking bases as a single docking base; select Enable to recognize the docking bases individually, by serial number.) ■ Enable/disable the reporting of the processor serial number by the processor to the software. HDD Self Test Options Run a quick comprehensive self test on hard drives in the system that support the test features. * Video modes vary even within regions. However, NTSC is common in North America; PAL, in Europe, Africa, and the Middle East; NTSC-J, in Japan; and PAL-M, in Brazil. Other South and Central American regions may use NTSC, PAL, or PAL-M. 2-6 Maintenance and Service Guide