HP F730US Compaq Presario F500 and G6000 Notebook PC - Maintenance and Service - Page 58
Two Hex HM5.0×7.0 standoffs, Six Phillips PM2.5×5.0 screws
![]() |
UPC - 883585437412
View all HP F730US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
3. Remove the following screws and standoffs: (1) Three Phillips PM2.5×4.0 screws (2) Six Phillips PM2.5×5.0 screws (3) Two Hex HM5.0×7.0 standoffs 4. Turn the computer right-side up, with the front toward you. 5. Release and disconnect the following ZIF cables from the system board: (1) Power button board cable (2) TouchPad cable 50 Chapter 4 Removal and replacement procedures
![](/manual_guide/products/hewlettpackard-presario-f500-compaq-presario-f500-g6000-notebook-pc-maintenance-service-guide-8b74768/58.png)
3
.
Remove the following screws and standoffs:
(1)
Three Phillips PM2.5×4.0 screws
(2)
Six Phillips PM2.5×5.0 screws
(3)
Two Hex HM5.0×7.0 standoffs
4
.
Turn the computer right-side up, with the front toward you.
5
.
Release and disconnect the following ZIF cables from the system board:
(1)
Power button board cable
(2)
TouchPad cable
50
Chapter
4
Removal and replacement procedures