HP G42-230US Compaq Presario CQ42 Notebook PC and HP G42 Notebook PC - Mainten - Page 99
assembly is reinstalled., each time the fan/heat sink assembly is
View all HP G42-230US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
NOTE: Due to the adhesive quality of the thermal material located between the fan/heat sink assembly and system board components, it may be necessary to move the fan/heat sink assembly from side to side to detach the assembly. 4. Remove the fan/heat sink assembly (3). The thermal material must be thoroughly cleaned from the surface of the fan/heat sink assembly (1), (3) and the processor (2) and video components (4) each time the fan/heat sink assembly is removed. Thermal pads and thermal paste must be installed on all surfaces before the fan/heat sink assembly is reinstalled. NOTE: Thermal pads and thermal paste are included with all fan/heat sink assembly, system board, and processor spare part kits. The following illustration shows the locations for thermal material on systems with discrete graphics subsystems. ENWW Component replacement procedures 89