HP G50-113CA HP G50 Notebook PC and Compaq Presario CQ50 Notebook PC - Mainten - Page 75
by sliding it forward until it clears the clip built into, Remove the TouchPad on/off button board
View all HP G50-113CA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
3. Release the ZIF connector on the TouchPad board to which the TouchPad on/off board cable is attached, and disconnect the TouchPad on/off board cable (2) from the TouchPad board. 4. Remove the two Phillips PM2.0×3.0 screws (1) that secure the TouchPad on/off button board to the top cover. 5. Release the TouchPad on/off button board (2) by sliding it forward until it clears the clip built into the top cover. 6. Remove the TouchPad on/off button board (3). Reverse this procedure to install the TouchPad on/off button board. Component replacement procedures 67
3.
Release the ZIF connector on the TouchPad board to which the TouchPad on/off board cable is
attached, and disconnect the TouchPad on/off board cable
(2)
from the TouchPad board.
4.
Remove the two Phillips PM2.0×3.0 screws
(1)
that secure the TouchPad on/off button board to
the top cover.
5.
Release the TouchPad on/off button board
(2)
by sliding it forward until it clears the clip built into
the top cover.
6.
Remove the TouchPad on/off button board
(3)
.
Reverse this procedure to install the TouchPad on/off button board.
Component replacement procedures
67