HP G60-129CA Service Guide - Page 51
Hard drive, Loosen the two Phillips PM2.5×6.0 captive screws
View all HP G60-129CA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Hard drive ✎ The hard drive spare part kit includes a hard drive bracket and hard drive connector. The hard drive bracket and hard drive connector, as well as the hard drive bracket screws, are also available in the Hard Drive Hardware Kit. Description 120-GB, 5400-rpm 160-GB, 5400-rpm 200-GB, 5400-rpm 250-GB, 5400-rpm 320-GB, 5400-rpm Hard Drive Hardware Kit Spare part number 504072-001 498478-001 505971-001 498477-001 498476-001 504059-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-7). Remove the hard drive: 1. Loosen the two Phillips PM2.5×6.0 captive screws 1 that secure the hard drive cover to the computer. 2. Lift the right side of the hard drive cover 2, swing it up and to the left, and remove the cover. The hard drive cover is included in the Plastics Kit, spare part number 486621-001. Removal and replacement procedures 4-10