HP G60 235DX Compaq Presario CQ60 Notebook PC and HP G60 Notebook PC - Mainten - Page 50
from each side of the hard drive., If it is necessary to replace the hard drive bracket
View all HP G60 235DX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
3. Remove the three Phillips PM2.5×5.0 screws 1 that secure the hard drive to the computer. 4. Grasp the Mylar tab 2 on the hard drive, and then slide the hard drive 3 to the right to disconnect it from the system board. 5. Remove the hard drive 4 from the hard drive bay. 6. If it is necessary to replace the hard drive bracket, remove the two Phillips PM3.0×4.0 hard drive bracket screws 1 from each side of the hard drive. 7. Lift the bracket 2 straight up to remove it from the hard drive. Reverse this procedure to reassemble and install the hard drive. Removal and replacement procedures 4-11
Removal and replacement procedures
4–11
3. Remove the three Phillips PM2.5×5.0 screws
1
that secure the hard drive to the computer.
4. Grasp the Mylar tab
2
on the hard drive, and then slide the hard drive
3
to the right to disconnect it from the
system board.
5. Remove the hard drive
4
from the hard drive bay.
6. If it is necessary to replace the hard drive bracket, remove the two Phillips PM3.0×4.0 hard drive bracket
screws
1
from each side of the hard drive.
7. Lift the bracket
2
straight up to remove it from the hard drive.
Reverse this procedure to reassemble and install the hard drive.