HP G62-233NR Compaq Presario CQ62 Notebook PC and HP G62 Notebook PC - Mainten - Page 88
fan/heat sink assembly., Remove the fan/heat sink assembly
View all HP G62-233NR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Removal and replacement procedures ✎ Steps 5 through 8 apply only to computer models equipped with graphics subsystems having discrete memory. 5. Turn the system board right-side up, with the front toward you. 6. Disconnect the fan cable from the system board. 7. Loosen the two Phillips captive screws 1 and four Phillips spring-loaded captive screws 2 that secure the fan/heat sink assembly. 8. Remove the fan/heat sink assembly 3 by lifting it straight up. Reverse this procedure to install the fan/heat sink assembly. 4-44 Maintenance and Service Guide
4–44
Maintenance and Service Guide
Removal and replacement procedures
✎
Steps 5 through 8 apply only to computer models equipped with graphics subsystems having discrete memory.
5. Turn the system board right-side up, with the front toward you.
6. Disconnect the fan cable from the system board.
7. Loosen the two Phillips captive screws
1
and four Phillips spring-loaded captive screws
2
that secure the
fan/heat sink assembly.
8. Remove the fan/heat sink assembly
3
by lifting it straight up.
Reverse this procedure to install the fan/heat sink assembly.