HP G7000 Drives - Windows Vista - Page 15

Replace the 2 hard drive screws, Align the tabs

Page 15 highlights

10. Disconnect the hard drive (2) by sliding it to the left. 11. Lift the hard drive away from the computer (3). To install a hard drive: 1. Lower the hard drive into the hard drive bay (1). 2. Slide the hard drive toward the hard drive connector (2) until it is fully seated. 3. Replace the 2 hard drive screws (3). 4. Align the tabs (1) on the hard drive cover with the notches on the computer. 5. Close the cover (2). 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18

10.
Disconnect the hard drive
(2)
by sliding it to the left.
11.
Lift the hard drive away from the computer
(3)
.
To install a hard drive:
1.
Lower the hard drive into the hard drive bay
(1)
.
2.
Slide the hard drive toward the hard drive connector
(2)
until it is fully seated.
3.
Replace the 2 hard drive screws
(3)
.
4.
Align the tabs
(1)
on the hard drive cover with the notches on the computer.
5.
Close the cover
(2)
.
9