HP G7032TU HP G7000 Notebook PC and Compaq Presario C700 Notebook PC - Mainten - Page 83
RTC battery, Switch cover see
View all HP G7032TU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
RTC battery NOTE: Removing the RTC battery and leaving it uninstalled for 5 or more minutes causes all passwords and CMOS settings to be cleared. Description RTC battery (includes double-sided tape) Spare part number 454947-001 Before removing the RTC battery, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 40). 5. Remove the following components: a. Hard drive (see Hard drive on page 41) b. Optical drive (see Optical drive on page 48) c. Keyboard (see Keyboard on page 50) d. Switch cover (see Switch cover on page 53) e. Display assembly (see Display assembly on page 55) f. Top cover (see Top cover on page 62) g. System board (see System board on page 72) Remove the RTC battery: 1. Turn the system board upside down, with the audio connectors toward you. 2. Disconnect the RTC battery cable (1) from the system board. Component replacement procedures 75