HP G72-b62US HP G72 Notebook PC - Maintenance and Service Guide - Page 104
System Configuration menu
View all HP G72-b62US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
System Configuration menu NOTE: Some of the listed System Configuration options might not be supported by the computer. Select Language Boot options Device Configurations To do this Change the Computer Setup language. ● Set an f9, f10, and f12 delay when starting up. ● Enable/disable CD-ROM boot. ● Enable/disable floppy boot. ● Enable/disable internal network adapter boot. ● Enable/disable MultiBoot, which sets a boot order that can include most boot devices in the system. ● Set the Express Boot Popup delay in seconds. ● Set the boot order. ◦ 1st boot device-USB CD-ROM ◦ 2nd boot device-USB floppy ◦ 3rd boot device-USB SuperDisk ◦ 4th boot device-Notebook hard drive ◦ 5th boot device-USB hard disk ◦ 6th boot device-Network controller ● Swap the functions of the fn key and left ctrl key. ● Enable/disable USB legacy support. When enabled, USB legacy support allows the following: ◦ Use of a USB keyboard in Computer Setup even when the operating system is not running. ◦ Startup from bootable USB devices, including a hard drive, diskette drive, or optical drive connected by a USB port to the computer. ● Enable/disable BIOS DMA data transfers. ● Enable/disable fan always on while connected to an AC outlet. ● Enable/disable data execution prevention. ● Enable/disable LAN power saving mode. ● Enable/disable SATA Native Mode. ● Enable/disable Dual Core CPU. ● Enable/disable HDD translation mode. 94 Chapter 5 Setup Utility ENWW