HP G72-b67CA HP G72 Notebook PC - Maintenance and Service Guide - Page 77
Power connector, Remove the power connector cable
View all HP G72-b67CA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Power connector Description Power connector (includes cable) Spare part number 616496-001 Before removing the power connector cable: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on the computer, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then disconnecting the AC adapter from the computer. 4. Remove the battery (see Battery on page 42). 5. Remove the following components: a. Hard drive (see Hard drive on page 43) b. Optical drive (see Optical drive on page 46) c. Keyboard (see Keyboard on page 54) d. Top cover (see Top cover on page 57) Remove the power connector cable: 1. Turn the computer upright with the right side toward you. 2. Disconnect the power connector cable (1) from the system board. 3. Lift the power connector (2) from the clips built into the base enclosure. Reverse this procedure to install the power connector. ENWW Component replacement procedures 67