HP G72-c55DX HP G72 Notebook PC - Maintenance and Service Guide - Page 90
by lifting straight up., assembly from side to side to detach the assembly.
View all HP G72-c55DX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
2. Disconnect the fan cable from the system board. 3. Follow the sequence embossed on heat sink to loosen the four Phillips PM2.5×7.0 captive screws (1) that secure the fan/heat sink assembly to the system board. NOTE: Due to the adhesive quality of the thermal material located between the fan/heat sink assembly and system board components, it might be necessary to move the fan/heat sink assembly from side to side to detach the assembly. 4. Remove the fan/heat sink assembly (2) by lifting straight up. NOTE: Steps 5 through 8 apply only to computer models equipped with graphics subsystems having discrete memory. 5. Turn the system board right-side up, with the front toward you. 80 Chapter 4 Removal and replacement procedures ENWW
2.
Disconnect the fan cable from the system board.
3.
Follow the sequence embossed on heat sink to loosen the four Phillips PM2.5×7.0 captive
screws
(1)
that secure the fan/heat sink assembly to the system board.
NOTE:
Due to the adhesive quality of the thermal material located between the fan/heat sink
assembly and system board components, it might be necessary to move the fan/heat sink
assembly from side to side to detach the assembly.
4.
Remove the fan/heat sink assembly
(2)
by lifting straight up.
NOTE:
Steps 5 through 8 apply only to computer models equipped with graphics subsystems
having discrete memory.
5.
Turn the system board right-side up, with the front toward you.
80
Chapter 4
Removal and replacement procedures
ENWW