HP HDX X16-1013TX HP HDX 16 Entertainment PC - Maintenance and Service Guide - Page 82
Remove the system board, by sliding it up and to the right.
View all HP HDX X16-1013TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
5. Remove the three Phillips PM2.0×4.0 screws that secure the system board to the base enclosure. 6. Use the optical drive connector 1 to lift the right side 2 of the system board until it rests at an angle. 7. Remove the system board 3 by sliding it up and to the right. Reverse this procedure to install the system board. Removal and replacement procedures 4-47
Removal and replacement procedures
4–47
5. Remove the three Phillips PM2.0×4.0 screws that secure the system board to the base enclosure.
6. Use the optical drive connector
1
to lift the right side
2
of the system board until it rests at an angle.
7. Remove the system board
3
by sliding it up and to the right.
Reverse this procedure to install the system board.