HP HDX X18-1110TX HP HDX 18 Entertainment PC - Maintenance and Service Guide - Page 59
keyboard cable, to which the keyboard cable is attached and disconnect
View all HP HDX X18-1110TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
6. Lift the rear edge of the keyboard 1 until it rests at an angle. 7. Release the keyboard 2 by sliding it back to disengage the tabs on the front edge of the keyboard from the top cover and rest it on the display. 8. Release the zero insertion force (ZIF) connector 1 to which the keyboard cable is attached and disconnect the keyboard cable 2 from the system board. 9. Remove the keyboard. Reverse this procedure to install the keyboard. Removal and replacement procedures 4-26
Removal and replacement procedures
4–26
6. Lift the rear edge of the keyboard
1
until it rests at an angle.
7. Release the keyboard
2
by sliding it back to disengage the tabs on the front edge of the keyboard from the
top cover and rest it on the display.
8. Release the zero insertion force (ZIF) connector
1
to which the keyboard cable is attached and disconnect the
keyboard cable
2
from the system board.
9. Remove the keyboard.
Reverse this procedure to install the keyboard.