HP High Availability Disk Array 10/20 User Guide - Page 126
Configuration, HP3000, Series 900, Configuration type, Features
![]() |
View all HP High Availability Disk Array 10/20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Configuration, HP3000 Series 900 Disk Array Configurations Configuration type Basic One host One SCSI-2 adapter One SCSI-2 bus One SP Two-SP One host One SCSI-2 adapter One SCSI-2 bus Two SPs Features With RAID of any supported level, applications can continue to run after the failure of a single physical disk module within a logical disk unit (LUN). Applications cannot continue to run if a SP or SCSI-2 adapter fails. Provides the same features as the basic configuration, but with better performance and higher availability. With RAID of any supported level, applications can continue to run after the failure of a single physical disk module. If one SP fails, the System Administrator must reassign ownership of the failed SP's LUNs to the operational SP by using Grid Manager. Also, the path to the operational SP must be used and can be changed with SYSGEN or ioconfig. Once these changes have been made, access to all LUNs on the array within the SCSI LUN limit is possible. If the SCSI-2 adapter fails, no I/O operations are possible between the host and the array. 5-3
![](/manual_guide/products/hewlettpackard-a3550a-user-guide-86f78e1/126.png)