HP IQ524 Watching and Recording TV - Page 14
Setting up the HP TouchSmart PC with a Set-top Box - video output
UPC - 884420541554
View all HP IQ524 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Setting up the HP TouchSmart PC with a Set-top Box If your TV signal for Windows Media Center requires a cable TV set-top box, a satellite set-top box, or another set-top box, you must connect the infrared (IR) emitter cable to the computer and your set-top box in order to use the remote control properly. The IR emitter cable is a remote control sensing device that connects to the computer and covers the remote sensor on a set-top box. It enables the remote control that came with your HP TouchSmart PC to operate your set-top box when you use the Windows Media Center program to select TV channels. To use a set-top box with Windows Media Center: 1 Connect the IR emitter cable (A) to the IR Out connector (D) on the back of the PC. 2 Remove the paper from the backing tape on the end of the cable (B), and then press the end of the cable over the remote infrared (IR) sensor (receiver) window on the set-top box (C). To locate the remote infrared sensor window, shine a flashlight through the plastic on the front of the set-top box. 3 When you use the remote control, point it at the front of the HP TouchSmart PC (E), not at the set-top box. USB 2.0 USB 2.0 USB 2.0 Gigabit Ethernet LAN SPDIF (output) 2.1 Audio (output) TV Signal Input (F-Type or PAL Coax, varies by region) S-video (input) Stereo Audio (input) D IR Blaster (output) C A E B WARNING: Please read "Additional Safety Information" in the Limited Warranty and Support Guide before you install your HP TouchSmart PC and connect it to the electrical power system. 10 Watching and Recording TV