HP IQ804 Upgrading and Servicing Guide - Page 14
Replacing a Memory Module, Align the new memory module with the socket - touchsmart back up 1
UPC - 884420018438
View all HP IQ804 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Replacing a Memory Module Upgrade the memory in your HP TouchSmart PC with memory of the same type and speed as the memory originally installed. The capacity for both memory modules must match for optimal performance. Both memory modules can be installed by using the same procedure listed below. CAUTION: When handling a memory module, be careful not to touch any of the contacts. Doing so may damage the module. 1 Remove the memory module. See "Removing a Memory Module" on page 8. 2 Align the new memory module with the socket, so that the key slot on the connector edge is the same as the module that you removed. NOTE: The sockets are keyed. If the module slot does not match the socket, turn the memory module over. 10 Upgrading and Servicing Guide