HP Indigo WS6000 Standard Operating Procedure -- Basic for Indigo WS6000 Serie
HP Indigo WS6000 Manual
View all HP Indigo WS6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Indigo WS6000 manual content summary:
- HP Indigo WS6000 | Standard Operating Procedure -- Basic for Indigo WS6000 Serie - Page 1
Standard Operating Procedure for HP Indigo WS6000 Series Digital Presses with ILD How-To Guide February 2015 - HP Indigo WS6000 | Standard Operating Procedure -- Basic for Indigo WS6000 Serie - Page 2
holders. The HP Indigo press' counter feature records the number of impressions you make using your press. The counter does not reflect any previous use of the press or its age. This English version of the information guide must be used as the original instructions. The HP Indigo press is a Class - HP Indigo WS6000 | Standard Operating Procedure -- Basic for Indigo WS6000 Serie - Page 3
...1 2 Procedures ...3 How to start the day...3 Preliminary operating procedure ...4 Appendix A Testing the substrate...7 Testing primer adhesion ...7 Priming and adhesion...7 Substrate treatment...8 Appendix B Documentation ...10 Appendix C Service and support ...11 iii - HP Indigo WS6000 | Standard Operating Procedure -- Basic for Indigo WS6000 Serie - Page 4
can benefit from reading this document? Customers with HP Indigo WS6000 Series Digital Presses equipped with an inline densitometer (ILD). This , frequently run the Auto Bias wizard to maintain color consistency. NOTE: Use an external X-Rite densitometer to perform the ILD Full Calibration. NOTE: Run - HP Indigo WS6000 | Standard Operating Procedure -- Basic for Indigo WS6000 Serie - Page 5
The optical density (OD) target values are: Table 1-1 OD target values - for presses with an ILD Color Yellow Magenta Cyan Black Orange Violet Green Matte 0.9 1.1 1.1 type of substrate. 11. Correct scaling variation on the fly using the Quick Scaling wizard. 12. The ink density and conductivity - HP Indigo WS6000 | Standard Operating Procedure -- Basic for Indigo WS6000 Serie - Page 6
): ■ Clean all the nip rollers (1 at the press input, 2 at the press output and 1 in the ILP), using warm water and a lint-free wipe. 4. Impression drum with warm water and a lint-free wipe. c. Clean the corona cartridge area using IPA and a lint-free wipe. d. Visually check that the primer hose is - HP Indigo WS6000 | Standard Operating Procedure -- Basic for Indigo WS6000 Serie - Page 7
instructions in How to start the day on page 3. 2. Open the main air supply valve to the press. 3. Open the main water lines to the press. 4. Turn on the press : ● Set the Gloss level to: ● Select the Calibration substrate - used in color calibration process option. In the Advanced tab: ● Verify that - HP Indigo WS6000 | Standard Operating Procedure -- Basic for Indigo WS6000 Serie - Page 8
passed, go to the next step. If not, do the relevant troubleshooting. 18. Perform Adhesion test (tape test according to FINAT WW standard) that the press was calibrated correctly, do the following: a. Verify the solid printed patches OD of the yellow, magenta, cyan, and black using the table - HP Indigo WS6000 | Standard Operating Procedure -- Basic for Indigo WS6000 Serie - Page 9
HP Indigo Defining Substrate, available from My HP Indigo portal at: https://myhpindigo-int-pro.houston.hp.com. Go to Technical Support > Labels & Packaging Presses, select your press The job has the same LUT that was used during calibration of the press (see step 16 above). d. The correct color matching - HP Indigo WS6000 | Standard Operating Procedure -- Basic for Indigo WS6000 Serie - Page 10
to test primer adhesion. 1. Use the printed color adjustment patches. paper stock substrates (coated paper, wine labels, paper label). 3. Press the tape to the substrate by passing the 2 kg roller over the substrate, the test failed and requires troubleshooting: a. Check primer condition. b. Check - HP Indigo WS6000 | Standard Operating Procedure -- Basic for Indigo WS6000 Serie - Page 11
3. Check ink adhesion / fixation on a regular basis, and with any new media surface, using the Michem® Indicator 001. Figure A-1 Checking ink adhesion / fixation 1 No primer 2 Primer present 3 Indicator 4 Inconsistent primer coating IMPORTANT: The fact that primer indicator states that - HP Indigo WS6000 | Standard Operating Procedure -- Basic for Indigo WS6000 Serie - Page 12
Figure A-2 Test without corona or incorrect dyne pen Figure A-3 Test with corona treatment and correct dyne pen Table A-1 Dyne Test Pen Surface tension after corona treatment (dynes/cm) PE - Polyethylene ≥ 44 PP - Polypropylene ≥ 38 PET - Polyester ≥ 54 Substrate treatment 9 - HP Indigo WS6000 | Standard Operating Procedure -- Basic for Indigo WS6000 Serie - Page 13
Support > Labels & Packaging Presses, select your press and search for the specific document under Latest Resources. ● Operating the Inline Primer (for HP Indigo WS6000 Series Digital Presses User Guide) ● Production handbook (for HP Indigo WS6000 Series Digital Presses and HP Indigo W7200 Series - HP Indigo WS6000 | Standard Operating Procedure -- Basic for Indigo WS6000 Serie - Page 14
Indigo Division Startbaan 16 1187XR Amstelveen The Netherlands Israel Hewlett-Packard Company Indigo Division Kiryat Weizmann P.O. Box 150 Rehovot 76101 Israel APJ Hewlett-Packard Company Asia Pacific Pte Ltd No. 2 Boon Leat Terrace # 04-01 Harbour Side 2 Singapore 119844 Service and support - HP Indigo WS6000 | Standard Operating Procedure -- Basic for Indigo WS6000 Serie - Page 15
Copyright © 2015 Hewlett-Packard Company This is an HP Indigo digital print. www.hp.com/go/indigo PN: CA394-22290