HP Integrity BL890c Windows Server 2008 SP2 and Windows Server 2008 R2 Overvie - Page 11
Performing administrative tasks
View all HP Integrity BL890c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
1. Booting Windows Server 2003 for Itanium-based systems from a storage area network application notes 2. Windows Server 2008 SP2 on HP Integrity Servers Installation Guide or Windows Server 2008 R2 on HP Integrity Servers Installation Guide Installation to multiple systems using RDP If you want to install the Windows software to multiple systems using RDP, see the following documents in order: 1. Rapid Deployment Pack Installation Guide 2. Rapid Deployment Pack User's Guide Installation to multiple systems using SSTK If you want to install the Windows software to multiple systems using SSTK, see the following documents in order: 1. Windows Server 2008 SP2 on HP Integrity Servers Installation Guide or Windows Server 2008 R2 on HP Integrity Servers Installation Guide 2. Smart Setup Scripting Toolkit Administrator's Guide Installation using the embedded 1068 controller (Blade servers only) If you want to install the Windows software to a BL860c or BL870c system using the embedded 1068 controller, see the following documents: • How to configure your embedded 1068 controller as the system boot controller on BL860c and BL870c blade servers • Windows Server 2008 SP2 on HP Integrity Servers Installation Guide or Windows Server 2008 R2 on HP Integrity Servers Installation Guide Performing administrative tasks After installing the Integrity Support Pack and HP Insight Management WBEM Providers, you can perform the following additional tasks: • Add and remove PCI cards (hot-plug operations) on HP Integrity servers. • Use the management processor (MP) • Use the Special Administration Console (SAC) • Manage software and firmware component versions • Manage your systems using HP System Management Homepage (SMH) • Update your system software using HP Smart Update Manager (HPSUM) • Configure any network adapters Adding and removing PCI cards For information on adding and removing PCI cards to and from your Integrity server, see the Windows Server 2008 and Windows Server 2008 R2 Hardware Administration Guide. Using the Management Processor (MP) The Management Processor (MP) provides access to the Special Administration Console (SAC) console or the EFI Shell and enables you to configure a machine before installing the operating system and to access the MP using the IP address specific to the MP. For information on using the MP, see the Windows Server 2003 and Windows Server 2008 Hardware Administration Guide. Using the Special Administration Console (SAC) Special Administration Console (SAC) is the primary Emergency Management Services command-line environment hosted by Windows Server 2003 and Windows Server 2008. It is separate from the command-line environment and provides different functionality. For Windows Solution Documentation 11